screw shaft
英 [skruː ʃɑːft]
美 [skruː ʃæft]
网络 螺旋轴; 螺杆轴; 丝杠; 艉轴
双语例句
- In addition, a screw connecting shaft is movably connected with the screws, so as to facilitate disassembly and assembly.
另外，螺杆连接轴同螺杆采用活连接形式方便拆卸和安装。 - Analysis of Strength about Screw Shaft of Biomass Feeder Based on Ansys
基于ANSYS的生物质进料器螺旋轴强度分析 - Deformation analysis on cantilever screw conveyer shaft based on method of dynamic double barycenters
基于动态双重心法的悬臂螺旋输送机螺旋轴的变形分析 - The utility model relates to a screw main shaft for a screw conveyer, which is a component used for material conveying in the mechanical field.
螺旋输送机螺旋主轴是应用于机械领域物料输送的部件。 - The running of axes X and Y is driven by servo motor and ball screw shaft and the punching position is controlled by double axes numerical control system.
轴及Y轴运行由伺服电机及滚珠丝杠驱动，由双轴数控系统控制冲孔位置。 - Conveyer screw shaft coupling
输送机螺旋轴联轴节 - A screw shaft tube boring process professional cutter is provided, which comprises a shank, a blade and a jbckscrew.
艉轴管镗孔加工专用刀具，包括刀柄、刀片及顶丝。 - The optical base and the feed screw or the guide shaft are held in contact with sliding members made of a resin or a ceramic and having a heat conductivity.
光学基座和进给丝杠或引导轴通过具有导热性的树脂制或者陶瓷制的滑动构件接触。 - Design of CNC Super-long Ball Screw Shaft Grinder
数控超长滚珠丝杠磨床设计 - Consequently it not only serves as driving piece and locating piece, but also serves as measuring piece, it plays an important role in mechanical industry, and inversely the developing of industry demands of more high precise screw shaft.
因此，丝杠不仅用作定位、传动元件，还可用来传递位移，它在机械工业中具有重要的地位，而工业的发展也对丝杠精度提出了越来越高的要求。 - Design for the Feed Screw Shaft of Defibrator for Bamboo Material
以竹材为原料的热磨机进料螺旋轴的设计与计算 - Research on the condition monitoring of screw shaft
船舶螺旋桨轴油液监测的研究 - This paper brings forth a liner model of the absolute rotating speed of material and rotating speed of the screw shaft, and analyses the liner relations between the ascending velocity of material and the rotating speed of the screw shaft.
本文提出和论证了物料的绝对转速与螺旋轴转速的线性模型，进而论证了物料上升速度与螺旋轴转速的线性关系。 - A engineering example of nodal positions optimization ptimal design of staff and centralizer span for single screw pump in inclined shaft.
一个节点位置优化的实际工程问题&单螺杆泵抽油杆系统扶正器间距的优化设计。 - The article introduces the structure and making ways of the float screw shaft.
详尽地介绍了浮动螺旋的结构及生产现场制作方法。 - Analysis of the fracture of screw bolt at the shaft coupling
联轴节螺栓断裂及原因分析 - Causes Analysis of Water into Screw Shaft Seal for Feed-water Pump and its Treatment
给水泵螺旋轴封进水原因分析及处理 - Talks on the float screw shaft of extruder
浮动螺旋再谈 - Analysis of Defletion on Screw Conveyor Shaft with Finite Element Method
螺旋输送机螺旋体挠度有限元分析 - Research on High Precision Dynamic Detecting System of Screw Shaft Helical Line Error Based on CPLD
一种基于CPLD的丝杠螺旋线误差动态检测方法 - Screw shaft is widely used as driving piece and locating piece, on account of the characteristic of its structure, it can implement both driving and locating, at the same time, it can turn angle displacement into line displacement.
丝杠是各种机械和仪器中用作定位、传动的重要零件，由于其结构特点，可把传动利定位在同一零件上实现，把角位移变成线位移。 - Aiming at high frequency of the fracture of screw pump's flexible shaft, the relationship between the probability of sureness and the use life of flexible shaft was given by adopting the method of probability analysis.
针对螺杆泵挠性轴在使用中频繁发生断裂这一问题，用概率分析方法有针对性地给出其安全使用概率与寿命之间的关系。 - Design the transmission of feeding system, i.e. motor, ball guide screw, shaft coupling.
进给系统的传动设计，主要是电机，滚珠丝杠，联轴器的选择与校核； - About the seal of screw shaft of submarine and the development of the corresponding technology
潜艇尾轴密封技术发展 - Based on the compression ratio 1 ∶ 1.9 obtained from the experiment, according to the material's even compression principle, design and computation for the geometry parameter of defibrator feed screw shaft for bamboo material was introduced. The method was feasible by the experiment.
依据实验得到的1∶1.9的压缩比值，根据物料的均匀压缩原理，介绍了以竹材为原料时热磨机进料螺旋轴几何参数的设计与计算，实践证明这种方法是可行的。 - Secondly, with the help of PRO/ ENGINEER software, the parts including screw element, shaft, machine barrel and bearing block etc, and assembly of mechanism have been accomplished.
利用PRO/ENGINEER软件完成了双螺杆磨浆机构的螺杆、芯轴、机筒、轴承座以及其他辅助部分的零件设计和装配设计； - The main functions include the screw shaft block type transverse feeding, fork ratchet type longitudinal fill the gaps.
该机构主要功能包括螺旋轴滑块式横向供苗，拨叉棘轮式纵向补苗。